Home > Knowledge > Content
How to install the solar system inverter?
- Jul 19, 2018 -

PS6530B.jpgsolar generating energy storage system.jpg

1. How to choose the installation location of the solar energy storage system inverter?

1) Do not install the inverter in direct sunlight. Failure to do so may result in additional internal temperature of the inverter, which will derate the inverter to protect internal components. Even the temperature is too high, causing the inverter temperature to malfunction.

2) The installation site should be strong enough to support the weight of the inverter for a long time.

3) The ambient temperature of the selected installation site is -25 °C ~ 50 °C, and the installation environment is clean.

4) The ambient humidity of the selected installation site is not more than 95%, and there is no condensation.

5) There should be enough clearance in front of the inverter to make it easy to observe the data and repair.

6) The installation place to ensure that it will not shake.

2. What should you pay attention to when installing solar energy storage system inverter?

1) Before installation, you should first check whether the inverter is damaged during transportation.

2) When selecting the PV inverter installation site, it should be ensured that there is no interference from any other power electronic equipment in the surrounding area.

3) Before making electrical connections, be sure to cover or disconnect the DC side circuit breakers with opaque materials. When exposed to sunlight, the PV array will generate dangerous voltages.

4) Pay attention to and follow the warning signs on the product.

5) Observe the static protection code and wear an anti-static wrist strap.

6) All installation operations must be performed by professional technicians only.

7) Avoid unnecessary board contact.

8) The cables used in the photovoltaic system power generation system must be firmly connected, with good insulation and appropriate specifications.

9) All electrical installations must meet local and national electrical standards.

10) The inverter must be connected to the grid after it has to be approved by the local power department and all electrical connections must be completed by professional technicians.

11) Visually inspect the equipment for damage or other dangerous conditions before operation.

12) Pay attention to the hot surface of the inverter. For example, a heat sink of a power semiconductor or the like maintains a relatively high temperature for a period of time after the inverter is powered off.