Portable Power Inverter Generator

Portable Power Inverter Generator

Feature: Quiet -natural physical cooling tech Safe -over 20 kinds of protection functions High Energy Density -compacted and lightweight Mini & Portable -L9.0*W5.5*H9.2 inch, only 12Lbs All In One -built-in inverter, li-ion battery and chargers Lithium Ion Battery -safe and 1,000 times long...

Send InquiryChat Now


Portable Power Inverter Generator

Portable Power Inverter Generator.jpg

Feature:

Quiet-natural physical cooling tech

Safe-over 20 kinds of protection functions

High Energy Density-compacted and lightweight

Mini & Portable-L9.0*W5.5*H9.2 inch, only 12Lbs

All In One-built-in inverter, li-ion battery and chargers

Lithium Ion Battery-safe and 1,000 times long cycle life

User Friendly-LCD shows battery level, charging and discharging power

Powerful: over 500W AC+DC output, jump starter with 400A peak at 12V.

Multiple Outputs-global standard AC outlets, 4* USB and 3*12 DC output ports

Convenient-can be charged anytime anywhere from soalr panel, car and adaptor

 

Portable Solar Power Station.png 

Portable Power Station-Outlet.png 

1. Handle

2. Solar Charging Port

3. Car/Adapter Charging Port

4. Car Jump Starter Output

5. Master Power On/Off Button

6. DC Power On/Off Button

7. AC Power On/Off Button

8. Power On/Off Indicators

9. LCD Display

10. USB Output

11. DC 12V Output for LED lamp

12. DC 12.6V Car Cigarette Output

13. AC Outputs

Unpacking your Portable Solar Power Station.png 

Charging Your PPS

■ Charge Me Now

Before using or storing, plug your PPS into the wall until it is fully charged.

Note: NEVER charge your PPS with solar panels and a wall charger at the same time.

 

■ LCD Battery Display

The LCD Battery Display indicates the charge level. There are 5 segments of the battery,

approximating 20%-40%-60%-80%-100% capacity. During Using, segments will disappear from

the display, indicating the remaining capacity. When charging your PPS, you will notice a battery

segment blinking at a 1 second interval. This indicates the current charge status and the numberunder INPUT shows the real-time charging power. Once It is fully charged, all battery segments will be lit and remain solid.

Charge your PPS when there is only a battery segment!

Battery-Segment.png

 

■ Charging from Solar

Charging From Solar-portable Power Inverter Generator .png 

1. Power on your PPS by press master power button for 2 seconds.

2. Place your solar panel where it will get as much direct sunlight as possible.

3. Connect the solar panel by solar charging cable, then insert the Anderson plug into one of the

INPUT ports on the left side of the PPS. You will know the PPS is charging when the number below

INPUT on LCD changes and the battery segments in the LCD BATTERY DISPLAY are blinking.

The PPS is fully charged when all battery segments stop blinking and remain solid.

4. You can also connect the PPS to other brands of solar panels using the Power-Pole port.

5. You can chain multiple Solar Panels together to reduce solar recharge times. Your PPS is

capable of taking in 120W of solar charging power. But the solar panel voltage should be from 14V to 40V, like 18V, 36V, etc.

6. NEVER charge your PPS with solar panels and a wall charger at the same time.

7. The PPS will stop charging battery when it's full of energy, by the built-in advance system control circuit module.

 

■ Charging from the Wall

Before using or storing, plug your PPS into the wall until it is fully charged.

Charging from the wall-portable power inverter generator.png 

Using the included AC Wall Charger, plug your PPS into any wall outlet. You will know the PPS is

charging when battery segments in the BATTERY DISPLAY are blinking and the number below

INPUT on LCD changes.

The PPS is fully charged when all battery segments stop blinking and remain solid. The PPS should

recharge from the wall in 6-8 hours. The PPS will stop charging battery when it's full of energy.

The AC wall charger comes in two pieces. Connect the two pieces by plugging the cable into the

box.

■ Charging from Your Car

Charging From Car-Portable power inverter generator.png 

Use the car charging cable, plug one end to your car cigarette socket and the other end to your

PPS. You will know the PPS is charging when battery segments in the BATTERY DISPLAY are

blinking and the number below INPUT on LCD changes. It’s a good choice to charging your PPS

when you drive all the way.

Note: Car with 12V starting battery can't charge this PPS fully, but car with 24V battery can.

production - Portable Power Station.jpgworkshop.jpg


CONTACT US: 

M.P. +86 13646003328 (whatsapp / Viber / Wechat)

Email:marketing@cnsolarcharger.com

Skype: aiden_642  

 


Hot Tags: portable power inverter generator, China, manufacturers, suppliers, factory
Related Products
Inquiry