Payment & Shipping Terms:
|Material:||304 Stainless Steel||Capacity:||500ml / 800ml / 1000ml / 1200ml|
|Product Size:||9.8*6.3*15.3cm / 10.4*7*17.9cm / 12.2*6.6*20.2cm/12.2*7.2*20.2cm||Packing Size:||55*34*34cm / 56.5*34.5*39cm / 57*27*43cm / 65.5*27*43cm|
Multiple Specifications Stainless Steel Custom Durable Hand Soap Dispenser For Hotel Airport
1. Economical-The hands-free dispenser only releases a drop of soap, which can control the flow and avoid waste.
2. The assembly and distribution mechanism of the parts independent container is 100% separable. Therefore, the mechanism will not be damaged by soap.
3. Durable material-304 stainless steel material, suitable for various cleaning products or alcohol disinfection supplies.
4. 5. A variety of capacity specifications can be selected: 500ml / 800ml / 1000ml / 1200ml. You can choose the right capacity products according to the needs of different occasions.
5. Small size, space saving, more convenient and flexible installation. Applicable to home toilets, kitchens, hotels and other places.
6. Suitable for multiple liquids without clogging.
Hand soap dispensor MP-2009GF.
500ml / 800ml / 1000ml / 1200ml for you choose.
Compatible with various places of use:Suitable for all kinds of factories, hotels, restaurants, office buildings, hospitals, banks, schools, exhibition halls, stadiums, airports, stations, homes and other places.
|Material||304 Stainless Steel|
|Capacity||500ml / 800ml / 1000ml / 1200ml|
|Type||Foam / Liquid / Spray|
|Product Size||9.8*6.3*15.3cm / 10.4*7*17.9cm / 12.2*6.6*20.2cm / 12.2*7.2*20.2cm|
|Packing Size||55*34*34cm / 56.5*34.5*39cm / 57*27*43cm / 65.5*27*43cm|
|N.W||10.6KGS / 13.1KGS / 10KGS / 10.2KGS|
|G.W||13.5KGS / 16KGS / 13.5KGS / 13.8KGS|
1. Please avoid entering the machine with water or flushing with water directly to avoid short circuit.
2. When installing or replacing , do not tilt the bottle. If a small amount of liquid flows out normally, wipe it off and still use it normally.
3. When replacing , please prevent debris from entering the bottle and prevent the debris from clogging the machine.
4. Do not use non-foam type for replacement, so as not to cause machine failure.
5. Please store this product in a cool place, avoid direct sunlight or close to heat sources.
6. If you need to clean, it is recommended to use a wet towel to gently wipe the soap dispenser in the closed state.
7. Under normal circumstances, there is no need to turn off the product, the machine will automatically enter the standby state after turning on the power, and can be used (no need to turn on and off every time).
8. When using, put the battery into the battery compartment, pay attention to the positive and negative directions, and make sure to close the battery cover.
9. Do not put this product under any mechanical pressure.
10. If there are obvious signs of damage, please do not use it again.
11. If the product will not be used for a long time, please remove the battery to avoid moisture and battery leakage.
12. Children should use it under the supervision of an adult to prevent foamy liquid from entering the eyes or accidental ingestion.
1. Q: Are you trading company or manufacturer ?
A: We are professional hand dryer manufacturer. We have more than 10years experience in producing hand dryers.
2. Q: Can we place a trial order to do some test?
A: Sure, we have test our hand dryers for many terms, also you can do more tests. Generally, trial order is also welcomed. We would like more new customer to place trial order!
3. Q:Do you accept OEM order?
A:Yes, of course. We provide various OEM service. You can customize your favorite products or even design a new model with our professional technological support. Our R&D department and manufacturing department will do together to ensure the quality and on time delivery.
4. Q: Can we print our logo on the hand dryers?
A: Yes, of course. Customized logo or shell color is at your choice.
5. Q: Do you provide hand dryer accessories for us?
A: We would provide 1% main parts in free according to you order. Such as circuit board, sensor probe etc.
Contact Person: John Wu